EasyManua.ls Logo

Ricoh Aficio 401 - Page 28

Ricoh Aficio 401
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mode No. Function Settings
Class 1 Class 2
4904
8
GA4 Setting
(Image
Process mode
in
Letter/Photo
mode: Photo
Areas)
Selects the image processing mode used for photo areas
in the Letter/Photo mode.
0: 1 x 1 dot processing
1: Error diffusion with 1 x 1 dot processing
2: 2 x 1 dot processing
3: Error diffusion with 2 x 1 dot processing
A smaller value causes the image to become more sharp
in focus.
Only works if 4904-4 is at 0.
10
GA4 Setting
(GA4 Test
Data)
Prints the test pattern for the GA4 IC, to test the GA4 chip
on the EX-IPU.
0: No Print
1: Gradation
2: Cross
3: Black bands
12 *
GA4 Setting
(BK Thresh
Level)
Changes the threshold level for binary
picture processing mode.
0 ~ 255
1 /step
40
A larger value causes the image to
become lighter.
13 *
GA4 Setting
(Top point
Level)
The value for pixels at an edge in binary
picture processing mode.
0 ~ 255
1 /step
128
Do not change the value.
14 *
GA4 Setting
(All Black
Level)
The value for black areas in binary picture
processing mode.
0 ~ 255
1 /step
255
Do not change the value.
16 *
GA4 Setting
(Print Top
Point Level)
The value for pixels at an edge in stamp
mode.
0 ~ 255
1 /step
128
Do not change the value.
17 *
GA4 Setting
(Print All
Black Level)
The value for black areas in stamp mode. 0 ~ 255
1 /step
255
Do not change the value.
18 *
GA4 Setting
(Dither
Pattern)
Selects the dither pattern used in binary
picture processing mode.
0: 70-line
1: 95-line
2: 140-line
3: 180-line
Do not change the value
.
4905
1
Path setting
(MSU video in)
Do not change the value 0
2
Path Setting
(ASAP Video
In)
Use to check the external ASAP video
interface with the dummy board. See the
"External ASAP Video I/F Test" section
for details.
Before this test is performed, the main
controller should be replaced with the
dummy board
0: Normal
1: Test
4907
GA4 Setting
(Auto
letter/photo
separation)
Selects whether the auto letter/photo
separation is performed in the
Letter/Photo mode or not.
Disabled
Enabled
Test purposes only
A195
Copier
25 April 1997 SERVICE PROGRAM MODE TABLES
25

Related product manuals