10.1.7 Right Cover
1. Open the front cover and pull out the paper tray and duplex.
2. Remove the LCT harness cover [A] (1 screw).
3. Remove the LCT rear cover [B] (2 screws).
4. Swing open the LCT [C] and open the by-pass feed table [D].
5. Remove the right cover [E] (4 screws).
[E]
[D]
[A] [B]
[C]
A166R531.wmf
A195
Copier
25 April 1997 INNER AND OUTER COVERS
41
To Next Page
Loading...
