4
7. Press the [ ] or [ /Menu] key to select [PBC Method], and then press [#Enter] key.
Easy Setup:
PBC Method
If the access point cannot be detected within 120 seconds, the search session expires.
If the connection attempt has failed, press the [#Enter] key again. If the problem persists,
check whether the access point is working properly.
Configuration is complete when connection to the access point is confirmed.
8. After you have made all the settings, press the [Escape] key.
9. Print the configuration page to check whether the machine has successfully con-
nected to the access point.
If the wireless LAN signal is reported as being unavailable (0%) on the configuration page,
the machine is not connected to the access point.
How to print the configuration page
the [
/Menu] key [List/Test Print] [Config. Page] [#Enter]
To Next Page
Loading...
