SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20241 D
Failure to form negative pressure in the maintenance unit (failure to release air
(due to ink intrusion, etc.)) (Tank 1 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20242 D
Failure to form negative pressure in the maintenance unit (failure to release air
(due to ink intrusion, etc.)) (Tank 2 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20243 D
Failure to form negative pressure in the maintenance unit (failure to release air
(due to ink intrusion, etc.)) (Tank 3 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20244 D
Failure to form negative pressure in the maintenance unit (failure to release air
(due to ink intrusion, etc.)) (Tank 4 error)
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
20251 D
Failure to form negative pressure in the maintenance unit (misalignment (failure
to detect by the feeler) / occasional failure to release air) (Tank 1 error)
Turn the main power switch off and then back on.
6. Troubleshooting
210
To Next Page
Loading...
