Ricoh CX2 Firmware Update Instructions

5
4. Update the firmware
1.
Make sure that the camera’s power is turned off.
2. While pressing the ADJ./OK button ! (1), hold
down the 6 (Playback) button (2) for 2-3 seconds.
• A confirmation message for the firmware update is displayed on
the picture display.
3. Use the ADJ./OK button F to select [Yes], and then press the ADJ./OK
button.
• The firmware update starts, and the following message is displayed on the picture display.
[Checking rewrite file]
[Rewriting program]
4. The camera automatically turns off and restarts.
• If the message [Incorrect rewriting file] is displayed and the camera is automatically turned off, check the camera model
again and retry the update using the correct firmware.
• The firmware files copied to the SD memory card are deleted when you format the SD memory card. Delete them if
necessary.

Ricoh CX2 Specifications

General

Brand	Ricoh
Model	CX2
Category	Digital Camera
Language	English