Ricoh CX4 - Advanced Settings; Photo Quality and Movie Settings; Exposure and Focus Adjustments

8
• If a message saying, [Incorrect rewriting file] appears on the picture display and the power to the
camera turns off automatically, check the model of the camera, and use the correct firmware to
update the firmware again.
• If the message, [No rewriting file] is displayed, then the firmware was not copied to the SD memory
card correctly.Confirm that the file was copied correctly. ( Refer to p. 3)
3. After updating the firmware is completed, the power to the camera will
once turn off automatically, and then the power will turn on in playback
mode
• If there are no image files that have been taken with the camera saved to the SD memory
card, the [No File] message will display.
4. Turn off the power to the camera
Get other manuals https://www.bkmanuals.com