137
MO-C1 Training
Slide 137
General Operation Sequence
1. Power On Initialization Process
1. The machine checks for paper jams, and issues a jam alert
if one is detected.
2. The print head caps in the maintenance unit are lowered to
uncap the print heads.
3. The horizontal motor switches ON and moves the carriage
to the start position and then back to the maintenance unit.
4. The positions of the print head OCFS actuators are
checked to determine whether sufficient ink remains in
each sub tank.
5. The print head sub tanks are air purged and filled as
needed, then the print heads are cleaned.
6. The print heads are capped.
7. The printer beeps twice when it is ready for operation.
OCFS, air purging: These will be explained in detail later
OCFS basically checks the level of ink in the sub tanks.
To Next Page
Loading...
