150
MO-C1 Training
Slide 150
Service Precautions
Rollers
The surfaces of the main rollers (original feed roller, original exit roller,
registration roller, and exit roller) are covered with a soft urethane
coating. This coating can be damaged quite easily (even with a fingernail).
Never touch the surface of these rollers with bare hands.
Always hold the rollers by the bare ends, where they are not coated.
Never use any type of strong organic solvent to clean the surface of these
rollers. Use only a cloth very slightly dampened with alcohol or water.
No additional notes
To Next Page
Loading...
