413
MO-C1 Training
Slide 413
White Lines or Horizontal Banding
Print heads may be clogged; do the Clean Print-heads procedure
from the Maintenance Menu. Use Flush Print-heads if necessary.
Do the Adjust Paper Feed procedure from the Maintenance Menu.
Clean or replace the maintenance unit.
Inspect the vertical encoder wheel for dirt or damage. Clean or
replace.
Replace the print head unit(s).
Replace the carriage unit.
Replacement and Adjustment > Print Head Cleaning and
Adjustment
Maintenance Menu: Clean Print-heads, Flush Print-heads, etc were described in
the Maintenance section of this course (Cleaning Procedures in the User Tools)
To Next Page
Loading...
