71
MO-C1 Training
Slide 71
Ink Collector Tank Storage Shelf
The ink collector tank storage shelf [A] is attached to the bottom
cross-piece of the scanner stand.
Set the extra ink collector tank on the shelf.
When the ink collector tank becomes full, the machine will stop.
The operator can remove the full tank and replace it with the
empty tank.
At the next PM visit, the service technician can swap the full tank
with another empty tank.
The PM interval for the machine is 10,000 m. But the ink collector tank fills up at
about 8,000 m (depending on the image contents of the printouts that have been
made).
The user can replace this tank easily, so when you arrive at 10,000 m, you can
take away the old tank from the shelf and put a new empty one on the shelf in its
place.
To Next Page
Loading...
