Printing Functions
56
3
Storing Class Mode Settings
A Press the {User Tools} key.
B Use the {U}{T} keys to select 4
Initial Settings, and then press
the {OK} key.
C Use the {U}{T} keys to select 6
Program/Change Class, and then
press the {OK} key.
D Use the {U}{T} keys to select a
number, and then press the {OK}
key.
Note
❒ If the number is already in use,
a message will be displayed
asking if you wish to overwrite
the settings stored. To over-
write, press the {OK} key. Oth-
erwise press the {Escape} key to
return to the previous display,
and then select another number.
E With the number keys, enter the
number of prints, and then press
the {q} key.
F With the number keys, enter the
number of classes, and then press
the {q} key.
Note
❒ Repeat Steps
D
to
F
to register
all of your classes.
G Press the {OK} key.
H Press the {Clear Modes/Energy Sav-
er} key.
The contents that you have stored
are now effective.
ANT027S
To Next Page
Loading...
