When the other item is selected, proceed to the step No.5.
3.Select [Custom Options] and press
direct key.
The selection of ISO sensitivity will display.
4.Select ISO sensitivity by
▲▼direct key
5.Press [OK] button.
*It may take longer time to save the processed image than usual when the [Noise Reduction] is set.
Q: How to operate [ND Filter]?
A: You can decrease 2 steps of the brightness by using ND filter.
It is useful that when you like to use slower shutter speed without changing the aperture.
The GRlll equipped built-in [ND Filter], you can set whether or not to always use the [ND Filter]
at the
□
,2 or
□
,2 [Exposure Setting].
The camera judges [On] or [Off] according to the situation. The ND filter is used if the
icon is displayed on the shooting screen when the shutter release button is depressed
halfway. It cannot be selected at the
(
The ND filter is always used. The icon is displayed on the shooting screen.
The ND filter is not used.
・The [ND Filter] can be set to [Fn Button] for [Fn Button Setting] at the C
□
,2[Customize Controls] menu.
To Next Page
Loading...
