Q: How can I return the focus frame to the center position after changing the focus frame position?
A: When the touch panel operation is on, double-tapping the screen will return the focus frame to the center
position.
*For the GR III, this function is effective with firmware version 1.30 or later.
To update to the latest GR III firmware version, click here.
Or other method is, If the focus mode is Select AF, Pinpoint AF, Tracking AF, or Continuous AF, the focus frame
can be moved by pressing the OK button on the shooting screen, and then pressing and holding the OK button
will return the focus frame to the center.
Q: Is it possible to shoot multiple exposures?
A: Yes it does. It takes images while compositing them together.
The method of compositing differs depending on the compositing method setting.
[Average]: Compositing with averaged exposure value.
[Adding]: Compositing with adding exposure value.
*If you have the correct exposure setting on one of your shots, it will be overexposed, so take a shot
with a lower exposure.
[comparative bright]: Compose the image by replacing only the bright areas compared to the first image.
Set it at the [Drive Mode] of the
□
,4[Shooting Settings] or [Drive Mode Button] of the [Direct Key].
Select [Drive Mode] Select [Multiple-exposure]
Select [Composite Mode] Select composite factor and press [OK] button
To Next Page
Loading...
