Ricoh GR III - Page 28

28
Q: What kind of operations can be done by the Touch Panel
For GR III (firmware version 1.30 or earlier)
A: You can perform operations such as selecting functions and setting the AF point for shooting
You can also pinch in and out during playback to change the magnification or flick to view the previous
and next images.
By default setting, only the AF point can be changed using the touch panel.
To perform autofocus and shooting using the touch panel, set [Touch AF] in the
C
□
,2[Customize Control]
menu.
AF Point
Sets the AF point to the touched pint.
AF point + Focus
Sets the AF point to the touched point and performs autofocus.
AF point + Focus + Shoot
Sets the AF point to the touched point, perform autofocus, and shoots.
Off
Does not use touch AF
Please use the GR III with the latest firmware.
To update to the latest GR III firmware version, click here
.
For GR IIIx and GR III (firmware version 1.40 or later)
A: You can perform operations such as selecting functions and setting the AF point for shooting
You can also pinch in and out during playback to change the magnification or flick to view the previous
and next images.
By default setting, only the AF point can be changed using the touch panel.
To perform autofocus and shooting using the touch panel, set [Touch AF] in the
C
□
,2[Customize Control]
menu.