Ricoh GR III - Page 30

30
◆PC/Software
Q: Which OS are confirmed function with USB(PC) connection.
A: Following OS are confirmed function.
Windows®
Windows® 10 (FCU / CU) (32bit / 64bit) / Windows®8.1(32bit / 64bit)
Mac
macOS 11 Bigsur
／
macOS v10.15 cata
ｌ
ina
／
macOS v10.14 Mojave
*This is a confirmation of operation using the latest version of the camera.
Q: How to transfer images to PC?
A: Connect the camera to PC with the USB cable (I-USB166) that contained with camera.
1. Turn the camera off
2. Open the terminal cover of the camera, and connect the USB cable to the USB terminal.
3. Connect the USB cable to the USB port of the computer.
The camera turns on and enters the playback mode.
The camera is recognizes as a device (RICOH GR III or RICOH GR IIIx ) by the computer.
When a memory card is inserted, the files on the memory card are displayed.
When a memory card is not inserted, the files in the internal memory are displayed.
4. Copy the captured images to the computer.
5. Disconnect the camera from the computer when the copy is complete.
6. Remove the USB cable from the camera.
*You cannot delete or transfer images in the camera from computer.(Only copy)
Caution:
・Do not remove the USB cable while copying images.
・If the battery level is low, it may take some time until the camera is recognized by computer.
・The USB cable that contained with camera is not corresponded with the USB3.0.
(corresponded with USB2.0)