I nstallation Guide - Ricoh Driver and Inks
1. Unpack and setup the p r i nter as described in the printer setup instructions. Have the printer plugged into a
power outlet
but not turned on. IMPORTANT: DO NOT INSTALL THE STANDARD EPSON CARTRIDGES.
Ink Cartridge Setup
CAUTION: DO NOT INSTALL THE STANDARD EPSON INKS BEFORE INSTALLING SUBLIMATION INK.
Do not power ON the printer before installing the cartridges.
Remove the Sublimation cartridges from the packaging .
Open front cover to reveal ink cartridge compartment
Insert the Sublimation cartridges in the indicated order. Press
each cartridge body until it engages securely.
Once all cartridges are in place, close the cartridge cover.
Note: DO NOT TURN ON THE POWER FOR THE PRINTER UNTIL THE DRIVER
INSTALLATION REQUIRES YOU TO.
Please Note: Do not shake or agitate the ink carts
before or after installation.
Cartridge Order: Black, Cyan, Magenta & Yellow
Installation
1
To Next Page
Loading...
Need help?
General