Ricoh GX7000

Configuring the Ricoh GelSprinter GX7000 Printer Driver to use the
Sublimation ICC Colour Correction Profile
Go to START—SETTINGS—PRINTERS &
FAXES.
Right click on your GelSprinter GX 7000
printer and choose PRINTING
PREFERENCES.
1
4
5
2
3
On the SETUP tab follow the numbered
sequence shown and configure the driver.
When you click on number 5 it will open the
following screen.
6 7
Change settings 6 and 7 as shown.
The remainder should be as default. Use the
diagram opposite to check the rest of the
settings.
3