Printing to the Ricoh GelSprinter GX7000 Printer using the
Sublimation ICC Colour Correction Profile in Corel.
When your image is ready to print click on
FILE - PRINT to open up the print dialogue
box.
(1) Click on the PREPRESS tab
(2) Tick the MIRROR box
2
1
(3) Click on the MISC tab
(4) Tick the APPLY ICC PROFILE box (and
verify that the correct profile is showing in the
brackets below)
Note : The tab next to Misc is now showing ‘1
Issue’. This is correct as it is reminding you that
‘color correction has been enabled for non postscript
output’
3
4
(5) Click the GENERAL tab
(6) Make sure the destination is to the correct
printer
(7) Click on PROPERTIES
This will take you to the printer properties
dialogue box as shown on Pages 2-3. From
there you can choose the ‘Custom Setting’ you
configured earlier.
When you are satisfied that the printer driver is
set up correctly you can click on PRINT .
5
6
7
8
To Previous Page
Loading...
Need help?
General