29
2
■ Leading Curtain Sync Mode
Refer to page 27 for the features and
conditions of use of this sync mode.
1 Set the flash mode dial to Leading curtain
sync ( ) position.
2 Confirm that the subject is within the
effective flash range and the ready lamp
is lit. Then take a picture.
■ Trailing Curtain Sync Mode
Refer to page 28 for the features and
conditions of use of this sync mode.
1 Set the flash mode dial to Trailing curtain
sync ( ) position.
2 Confirm that the subject is within the
effective flash range and the ready lamp
is lit. Then take a picture.
■ 先幕シンクロモード
このシンクロモードの特徴や使用条件につ
いては、27ページを参照してください。
1 発光モード切り替えダイヤルを「先幕シ
ンクロ( )」に合わせます。
2 充電完了ランプの点灯を確認してから、
撮影します。
■ 後幕シンクロモード
このシンクロモードの特徴や使用条件につ
いては、28ページを参照してください。
1 発光モード切り替えダイヤルを「後幕シ
ンクロ( )」に合わせます。
2 充電完了ランプの点灯を確認してから、
撮影します。