5
Sharing
98
4 Tap [PENTAX_xxxxxx] in
the [Network List].
The [Enter Password] screen
appears.
5 Enter the password, and
tap [Connect].
A Wi-Fi connection is established
between the camera and the
communication device.
The list of images appears on the
Image Sync screen.
t Memo
• Refer to [Communication Info] in [Wi-Fi] of the D3 menu for
the default password. (p.96)
1 Set the wireless LAN (Wi-Fi) function to ON on
the communication device.
2 Tap [PENTAX_xxxxxx] in the list of detected Wi-
Fi networks.
3 Enter the password, and
tap [Join].
A Wi-Fi connection is established
between the camera and the
communication device.
4 Start Image Sync on the communication device.
Image Sync is started, and the list of images appears.
When an iOS Device is Used
To Next Page
Loading...
