After shooting, the imprint mark "PRINT" blinks in the display panel for a few seconds for correct imprinting.
The mark and the letter "M" are not imprinted on the picture.4www.butkus.org
Resenting the date and time
1. Press and hold the Mode/Select Bunon for more than 2 seconds until the year digits flash. (Fig. 32)
2. When the Mode/Select Button is pressed, the flashing digits change in the order of year, month, day, hour and
minute. (Fig. 33)
3. When the digits to be reset flash, press the Set Bunon until the desired digits appear. When the Set Burton is
kept pressed, the digits change rapidly. (Fig.34)
4. When you have finished resetting the date and time, press the Mode Button. The Print mark appears in the
display panel. (Fig. 35)
To Next Page
Loading...
