To Next Page
L
Lorraine Walton MDAug 15, 2025
Why does my Ricoh R50 Digital Camera say 'Battery depleted'?
- PPerry HebertAug 15, 2025
The “Battery depleted” message appears because the battery pack is consumed. You should recharge it.
Why does my Ricoh R50 Digital Camera say 'Battery depleted'?
The “Battery depleted” message appears because the battery pack is consumed. You should recharge it.
How to fix no power on my Ricoh R50 Digital Camera?
If your Ricoh Digital Camera has no power, it could be due to several reasons: the battery pack is dead (recharge it), the battery pack has not been inserted correctly (reinsert it correctly), or the battery/card compartment cover is not completely closed (close it completely).
What to do if the flash does not operate on my Ricoh R50?
If the flash on your Ricoh Digital Camera isn't working, it might be because the flash off mode is selected (set the flash to automatic flash mode or forced flash mode), or the battery pack is dead (recharge the battery pack).
Why is my Ricoh R50 image too dark?
If your Ricoh Digital Camera images are too dark, it could be due to several reasons: the flash was blocked, the subject was too far away, the subject was lit from behind, or there is not enough light. To resolve this, hold the camera correctly ensuring the flash is not obstructed, capture the image within the flash's operational range, use forced flash mode or the exposure correction function, or adjust the ISO sensitivity setting.
What to do if my Ricoh R50 Digital Camera operation buttons do not work?
If the operation buttons on your Ricoh Digital Camera aren't working, it might be because your finger is touching the shutter button, and the focus lock is active. Remove your finger from the shutter button, and then try using the operation buttons again.
Why does my Ricoh Digital Camera turn off by itself?
If your Ricoh Digital Camera turns off by itself, it is not a malfunction, the power save function is operating.
Why is there noise in the captured image of my Ricoh R50?
If there is noise in the captured image from your Ricoh Digital Camera, the ISO sensitivity setting may be too high. Set the ISO sensitivity to a lower setting.
What to do if my Ricoh R50 won't capture an image when I press the shutter button?
If your Ricoh Digital Camera doesn't capture an image when you press the shutter button, it could be because the maximum number of images or video clip recording time has been reached. To solve this, install a new card, or delete unnecessary images, saving important ones to separate media first.
How to fix no playback image appears on Ricoh Digital Camera?
To fix the issue of no playback image appearing on your Ricoh Digital Camera, press the playback button [=]. This activates the playback mode.
Why does a flicker appear when recording a video clip under fluorescent lights with my Ricoh R50?
When recording a video clip under fluorescent lights with your Ricoh Digital Camera, a noticeable flicker appears in the image because the shutter speed is too fast. Set the ISO sensitivity to w or less.
General| Sensor Type | CCD |
|---|---|
| Lens | Ricoh Lens |
| Shutter Speed | 8 - 1/2000 sec |
| Type | Compact |
| Sensor Size | 1/2.5 inch |
| ISO Sensitivity | 100, 200, 400 |
| Storage Media | SD |
