English 36
CAPTURING AND PLAYING BACK STILL IMAGES
There are two modes for capturing still images. In the single-shot mode, one
image is captured each time the shutter button is pressed. In the sequential
shots mode, when you press the shutter button, several successive images
are captured. For more information about taking sequential shots, please see
page 45.
Shooting single shots
1 Set the camera to the single-
shot mode (page 32).
2 Press the shutter button
halfway.
h Engage the autofocus by
pressing the shutter button
halfway (focus lock).
3 Gently press the shutter
button.
h Press the shutter button
gently, taking care not to
move the camera.
h The image that was
captured appears on the
monitor as long as the
shutter button is kept
pressed (post view).
F3.5
To Next Page
Loading...
