103 English
POST-VIEW SETTING
Specify the duration that the captured image appears on the monitor (post-
view) after the shutter button is pressed.
1 Display the Setup Menu (page 98).
2 Select “POST VIEW” and press the OK button.
h The Post View Menu appears.
1sec:
The post-view image is displayed for 1 second.
2sec:
The post-view image is displayed for 2 seconds.
OFF:
The post-view image is not displayed.
3 Select the desired setting, and press the OK button.
h This completes the post-view setting.
To Next Page
Loading...
