105 English
TV SYSTEM SETTING
Specify the type of image signal that is output from your camera’s USB AV-
OUT terminal.
1 Display the Setup Menu (page 98).
2 Select “TV SYSTEM” and press the OK button.
h The TV System Menu appears.
NTSC:
Outputs NTSC video signals.
PAL:
Outputs PAL video signals.
3 Select the desired setting, and press the OK button.
h The selected TV system is set.
HINT
If no image appears on the TV...
i If the TV system setting is not correct for the connected equipment, no
image will appear on the TV.
To Next Page
Loading...
