Ricoh SG 3110DNW - Setting the Date and Time

Setting the Date and Time
Use the following procedure to specify the date, time, and time zone.
Date setting
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
Menu:
Maintenance
3. Press the [ ] or [ /Menu] key to display [Date/Time], and then press the [#Enter] key.
Maintenance:
Date/Time
4. Press the [ ] or [ /Menu] key to display [Date Setting], and then press the [#Enter] key.
Date/Time:
Date Setting
5. Press the [ ] or [ /Menu] key to set the date, and then press the [#Enter] key.
(mainly Europe and Asia)
Date Setting:
30/ 8/2012
(mainly North America)
Date Setting:
8/30/2012
To specify the time right after this step, go to Step 4 in "Time Setting".
See page 142 "Time setting".
6. Press the [Escape] key.
Time setting
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
Menu:
Maintenance
4. Machine Setup Menus
142