· ADVANCING FILM AND WINDING SHUTTER
2. Place your thumb to original
position to catch returning lever.
· SETTING SHUTTER SPEEDS
The desired shutter speed is set by rotating the shutter speed dial to the black dot on the camera top
cover. This may be done before or after the shutter is wound. When set at " B " or bulb, the shutter
will remain open for as long as the shutter release is held depressed. Speeds are: 1, 1/2, 1/4, 1/8,
1/15, 1/30, 1/60, 1/125, 1/500 and 1 /l non second
To Next Page
Loading...
