RidgeLine 97006 - Page 25

Fig. 5
9. Refit the cover (11). If necessary, turn the tension screw (10) clockwise or
anticlockwise
with the multi tool (31) to adjust the tension pin (10a) until it
reaches a position where it can be inserted into the tension hole (8c) (Fig. 6).
Fig. 6
10. Secure the cover (11) with the retaining nuts (9) (Fig. 7).
8b
87
10a
10
31
8c
11
25
For Customer Service:
Please call 877-713-3189 (Toll Free), or email: Support@fot-usa.com