Need help?Do you have a question about the RIDGID FG-100 and is the answer not in the manual?
General| Brand | RIDGID |
|---|---|
| Model | FG-100 |
| Category | Measuring Instruments |
| Language | English |
Details on the FG-100's physical layout, including the instrument components and keyboard functions.
Describes the various connection ports on the FG-100 and its primary applications in flue gas analysis.
Explains the FG-100's system for automatically diluting high CO concentrations to protect the sensor.
Instructions for changing the paper roll, printer ribbon, and emptying the water trap.
Information on consumable parts and guidelines for charging the instrument's battery.
Guide to setting up the instrument's country, printer headers, and clock settings.
Covers setting engineering units and CO diluted to Oxygen reference for measurements.
Steps for conducting flue gas analysis, including fuel selection and draft measurements.
Instructions for using the external probe and performing smoke index measurements.
Guidance on correctly connecting the probe to the instrument and inserting it into the chimney.
How to view analysis values, print reports, and configure CO dilution settings.
Procedure for measuring flow and return temperatures using the thermocouple input.
Details on performing network leak tests, including Test A (one minute).
Specific instructions for performing the two minute tightness test (Test B).
To Next Page
