RIDGID FlexShaft K9-102 User Manual

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Model K9-102 & K9-204

FlexShaft

™

Drain Cleaning

Machines

• Français – 15

• Deutsch – 33

K9-102 & K9-204 Manual

w ww . . co m

information@itm.com1.800.561.8187

Questions and Answers:

J
Jacob GayJul 27, 2025
Why does my RIDGID Other FlexShaft machine wobble or move when cleaning a drain?
- B
  Brianna BrownJul 27, 2025
  The FlexShaft machine might wobble or move due to several reasons. Make sure the cable assembly is not being forced. Use the correct FlexShaft Machine or chain knocker for the pipe diameter. Ensure the drill is not being run in reverse unless the flex shaft is caught. Also, a corroded cable assembly, a worn-out cable/sheath, or improper support can cause this issue. Finally, be sure that the chain knocker is properly set up and the drill and settings are appropriate. Placing the machine on a level surface is also important.
E
edwardssamanthaAug 10, 2025
How to prevent cable kinking or breaking in my RIDGID Other FlexShaft machine?
- K
  Kayla ToddAug 11, 2025
  To prevent cable kinking or breaking, avoid forcing the cable assembly. Ensure you're using the correct FlexShaft Machine or chain knocker for the pipe size. Use reverse only if the flex shaft gets caught. Routinely clean the cable assembly to avoid corrosion. Replace the cable assembly if it's worn out and support it properly according to the instructions. Also, properly set up/adjust the chain knocker as per the instructions and choose the proper drill and settings.

RIDGID FlexShaft K9-102 Specifications

General

Model	K9-102
Type	FlexShaft
Weight	24 lbs
Power Source	Electric
Motor	1/4 HP
Drain Size Capacity	3 in
Input Power	120 V

Summary

Safety Symbols

General Safety Rules

Work Area Safety

Electrical Safety

Personal Safety

Tool Use and Care

Specific Safety Information

FlexShaft Drain Cleaning Machine Safety

Crucial safety precautions specific to the FlexShaft machine to prevent serious injury.

Specifications

Pre-Operation Inspection

Machine and Work Area Set-up

Procedures for setting up the machine and work area to ensure safe operation and prevent damage.

Installing/Adjusting Chain Knocker

Step-by-step guide for correctly installing and adjusting the chain knocker for optimal performance.

Operation Instructions

Advancing/Retrieving the Cable Assembly

Rotating the Chain Knocker

Maintenance Instructions

Cleaning

Troubleshooting

Service and Repair

Related product manuals

RIDGID FlexShaft K9-204

Preview: RIDGID K-60SP