RIDGID R250AF18 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
ANGLED FINISH NAILER
CLOUEUSE DE FINITION ANGULAIRE
CLAVADORA DE ACABADO ANGULAR
R250AF18
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite:
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings.................................................2-3
 Nailer Safety Warnings............................3-5
Symbols ..................................................... 6
 Glossary of Terms ...................................... 7
 Features ..................................................... 8
 Assembly ................................................... 8
 Operation ..............................................9-11
 Troubleshooting ....................................... 11
 Maintenance ............................................ 12
 Figures (Illustrations) ...........................13-14
 Parts Ordering and Service .........Back page
TABLE DES MATIÈRES
****************
 Règles de sécurité relatives
aux outils électriques ..............................2-3
 Avertissements de sécurité
relatifs cloueuse......................................3-5
Symboles ................................................... 6
 Glossaire .................................................... 7
 Caractéristiques ......................................... 8
 Assemblage ............................................... 8
 Utilisation ..............................................9-11
 Dépannage ............................................... 11
 Entretien ................................................... 12
 Figure numéros (illustrations) .............13-14
 Commande de pièces
et réparation .............................Page arrière
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad
para herramientas eléctrica .................. 2-3
 Advertencias de clavador ..................... 3-5
Símbolos ...................................................6
Glosario de Términos ................................ 7
Características ..........................................8
Armado .....................................................8
Funcionamiento .................................. 9-11
Corrección de problemas .......................11
Mantenimiento ........................................12
Figura numeras (ilustraciones) .......... 13-14
Pedidos de piezas
y servicio .............................. Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
Includes: Angled Finish Nailer, Battery Pack,
Charger, and Tool Bag
Includes: Cloueuse de finition angulaire,
bloc-piles, chargeur, et sac à outils
Includes: Clavadora de acabado angular, paquete
de baterías, cargador, y bolsa de herramientas

RIDGID R250AF18 Specifications

General

Fastener Gauge	18
Operating Pressure	70-120 PSI
Magazine Capacity	100
Power Source	Pneumatic
Depth Adjustment	Yes
Tool-Free Jam Release	Yes
Width	4.5 in

Summary

General Power Tool Safety Warnings

Work Area Safety

Safe operation in the work environment.

Electrical Safety

Precautions for safe electrical connection and use.

Personal Safety

User alertness, PPE, and common sense during operation.

Power Tool Use and Care

Guidelines for proper tool operation and maintenance.

Nailer Safety Warnings

Battery Tool Use and Care

Precautions for battery tool usage and charging.

Service

Guidelines for qualified repair and replacement parts.

Nailer Specific Safety

Safe practices for nailer operation and handling.

Operation Safety

Safe handling, trigger control, and tool operation.

Symbols

Signal Words

Explanation of risk levels associated with product signals.

Product Symbols

Designation and explanation of symbols used on the product.

Glossary of Terms

Key Terminology

Definitions of operational and tool-related terms.

California Proposition 65 Warning

Information on chemicals in product dust and associated risks.

Features

Product Specifications

Technical details of the angled finish nailer.

Know Your Finish Nailer

Understanding the product for safe and effective use.

Angled Magazine

Description of the angled magazine for access.

Belt Hook

Information about the tool's belt hook feature.

Depth of Drive Adjustment

How to select precise driving depth.

Jam Release

Tool-free mechanism for clearing jams.

LED Light

Functionality of the tool's LED indicator light.

No-Mar Pad

Feature to prevent marring on softer woods.

Overmold Grip and Trigger

Ergonomic features for comfort and control.

Trigger Mode Selector

Options for contact or sequential actuation.

Assembly

Operation

Applications

List of intended uses for the finish nailer.

Installing/Removing Battery Pack

Procedure for battery pack installation and removal.

No-Mar Pad

Procedure for removing and replacing the no-mar pad.

Loading the Tool with Nails

Step-by-step guide for loading fasteners into the magazine.

Using the Trigger Mode Selector

Instructions for setting and using trigger modes.

Drive Depth Adjustment

How to adjust the driving depth of fasteners.

Troubleshooting

Removing Nails from the Tool

Procedure for safely removing nails from the tool.

Clearing a Jammed Fastener

Steps to safely clear jammed fasteners.

Troubleshooting Table

Common problems, causes, and solutions.