RIDGID R350CHD User Manual

1
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
CLIPPED HEAD FRAMING NAILER
CLOUEUSE DE CHARPENTIER POUR CLOUS SANS TÊTE
CLAVADORA DE ENTRAMAR PARA
CLAVOS DE CABEZA RECORTADA
R350CHD
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite:
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
SAVE THIS MANUAL FOR FUTURE REFERENCE
Cette cloueuse de charpentier a été conçue et fabriquée
conformément à nos strictes normes de fiabilité, simplicité
d’emploi et sécurité d’utilisation. Correctement entretenue, elle
vous donnera des années de fonctionnement robuste et sans
problème.
AVERTISSEMENT :
Pour réduire les risques de blessures, l’utilisateur doit
lire et veiller à bien comprendre le manuel d’utilisation
avant d’employer ce produit.
Merci d’avoir acheté un produit RIDGID
®.
Su clavadora de entramar ha sido diseñado y fabricado de
conformidad con nuestras estrictas normas para brindar
fiabilidad, facilidad de uso y seguridad para el operador.
Con el debido cuidado, le brindará muchos años de sólido
y eficiente funcionamiento.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador antes de usar
este producto.
Le agradecemos la compra de un producto RIDGID
®.
Your framing nailer has been engineered and manufactured to our high standards for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a RIDGID® product.

RIDGID R350CHD Specifications

General

Operating Pressure	70 - 120 psi
Power Source	Pneumatic
Tool-Free Jam Release	Yes
Sequential Trigger	Yes
Fastener Type	Clipped head framing nails
Fastener Length	2 in. - 3-1/2 in.
Depth Adjustment	Yes

Summary

General Safety Rules

Work Area Safety Guidelines

Guidelines for maintaining a safe and clutter-free work environment to prevent accidents.

Personal Safety Measures

Essential personal protective equipment and practices to avoid injury during operation.

Tool Usage and Care Instructions

Proper methods for operating, maintaining, and caring for the tool to ensure safe use.

Service Personnel and Parts

Specific Safety Rules

Pneumatic Tool Familiarization

Safe Operation Procedures

Safe practices for operating the nailer, including trigger use and handling.

Air Supply and Hose Connection Safety

Safe procedures for connecting and using the air supply, including precautions for fittings.

Safe Nail Loading Procedures

Safe practices for loading fasteners into the tool, avoiding accidental discharge.

ASSEMBLY

OPERATION

Tool Preparation and Lubrication

Instructions for lubricating, checking air pressure, and connecting the tool to an air supply.

Connecting to Air Supply System

Loading Nails into the Tool

Step-by-step guide for safely loading nails into the magazine.

Selectable Trigger Modes

Single Sequential Actuation Mode

Contact Actuation Mode Operation

Setting Air Pressure and Drive Depth

Guidance on adjusting air pressure and drive depth for optimal performance.

Angle Nailing Safety and Technique

Removing Nails and Clearing Jams

Procedures for safely removing nails and clearing jammed fasteners.

Maintenance and Care Procedures

Lubrication and Cold Weather Operation

Daily Operational Checklist

A daily checklist to ensure the tool is in safe and proper working condition.

Accessories and Troubleshooting Guide

Troubleshooting Common Issues

Solutions for common issues like air leaks, tool malfunction, and jamming.