RIDGID R86241 - User Manual

To Next Page

To register your

RIDGID product, please visit:

Pour enregistrer votre produit de

RIDGID, s’il vous plaît la visite :

Para registrar su producto de

RIDGID, por favor visita:

WARNING:

To reduce the risk of injury, the

user must read and understand

the operator’s manual before

using this product.

ADVERTENCIA:

Para reducir el riesgo de lesiones,

el usuario debe leer y comprender

el manual del operador antes de

usar este producto.

AVERTISSEMENT :

Pour réduire les risques de blessures,

l’utilisateur doit lire et veiller à bien

comprendre le manuel d’utilisation

avant d’employer ce produit.

SAVE THIS MANUAL FOR

FUTURE REFERENCE

GUARDE ESTE MANUAL

PARA FUTURAS CONSULTAS

CONSERVER CE MANUEL

POUR FUTURE RÉFÉRENCE

OPERATOR’S MANUAL

MANUEL D’UTILISATION

MANUAL DEL OPERADOR

18 V OSCILLATING MULTI-TOOL

OSCILLANT OUTIL POLYVALENT DE 18 V

OSCILANTE MULTI-HERRAMIENTAS DE 18 V

R86241

TABLE OF CONTENTS

****************

 General Power Tool

Safety Warnings .............................. 2-3

 Multi-Tool Safety Warnings ................ 4

Symbols .............................................. 5

Features .............................................. 6

 Assembly ............................................ 6

 Operation .........................................6-8

 Maintenance ....................................... 8

 Illustrations ....................................9-10

 Parts Ordering

and Service ......................... Back page

TABLE DES MATIÈRES

****************

 Avertissements de sécurité générales

relatives aux outils électriques ........ 2-3

 Avertissements de sécurité relatifs

au outil polyvalent ...............................4

Symboles ............................................. 5

Caractéristiques ..................................6

 Assemblage ......................................... 6

 Utilisation ......................................... 6-8

 Entretien ..............................................8

 Illustrations .................................... 9-10

 Commande de pièces

et dépannage .................... Page arrière

ÍNDICE DE CONTENIDO

****************

 Advertencias de seguridad para

herramientas eléctrica .................... 2-3

 Advertencias de seguridad para

multi-herramientas ..............................4

Símbolos .............................................5

Características ....................................6

 Armado ................................................6

 Funcionamiento ............................... 6-8

 Maintenimiento ................................... 8

 Illustraciones ................................. 9-10

 Pedidos de piezas

y servicio ........................ Pág. posterior

INCLUDES: Multi-tool, Wood Blade, Segment Saw

Blade, Detail Sanding Backing Pad, Sandpaper,

Operator’s Manual

INCLUT: Outil polyvalent, lame de bois, lame de

scie segmentaire, plateau porte-disque abrasif de

finition, papier abrasif, manuel d’utilisation

INCLUYE: Multi-herramientas, hoja de madera, hoja

de sierra segmentada, almohadilla de respaldo para

lijado detallado, hojas de lija, manual del operador

Main Page

Need help?

Do you have a question about the RIDGID R86241 and is the answer not in the manual?

The RIDGID 18V Oscillating Multi-Tool (Model R86241) is a versatile cordless power tool designed for a wide range of applications, including cutting, sanding, scraping, and grinding. Its oscillating action allows for precise control and efficient material removal in various tasks.

Function Description

The multi-tool is powered by an 18V lithium-ion battery, providing cordless convenience and portability. It utilizes an oscillating head that moves back and forth at high speeds, allowing different accessories to perform specific functions.

Cutting: With appropriate saw blade accessories, the multi-tool can make plunge cuts, flush cuts, and intricate cuts in materials such as wood, plastic, drywall, and soft metals. This makes it ideal for tasks like cutting out openings for electrical boxes, trimming door casings, or cutting pipes in tight spaces.
Sanding: Equipped with a sanding pad and various grits of sandpaper, the tool transforms into an effective detail sander. It can be used for sanding wood, removing paint, smoothing surfaces, and preparing materials for finishing. Its triangular sanding pad allows access to corners and tight areas that traditional sanders cannot reach.
Scraping: A scraping blade accessory enables the removal of old paint, caulk, adhesives, and floor coverings. The oscillating action helps to lift and separate materials from surfaces efficiently.
Grinding: With specialized grinding accessories, the multi-tool can be used for grinding mortar, thin-set, and grout, making it useful for tile removal or repair projects.

The tool features a variable speed dial, allowing users to adjust the oscillation rate to match the material and application. This control is crucial for achieving optimal results and preventing damage to the workpiece or accessory. An LED light illuminates the work area, improving visibility in dimly lit conditions. The tool's design emphasizes user comfort and control, with an ergonomic grip to reduce fatigue during extended use.

Important Technical Specifications

Power Source: 18V Lithium-Ion Battery (sold separately)
Oscillation Speed: 10,000 - 20,000 oscillations per minute (OPM)
Oscillation Angle: 3.2 degrees
Tool-Free Accessory Change: The multi-tool incorporates a tool-free accessory change system, allowing for quick and easy swapping of blades, sanding pads, and other attachments without the need for additional tools. This enhances efficiency and reduces downtime during projects.
Universal Accessory Compatibility: The tool is designed to accept universal oscillating tool accessories, providing users with a wide selection of attachments from various manufacturers.
Weight: (Specific weight not provided in the manual, but generally lightweight for portability)

Usage Features

Variable Speed Control: The variable speed dial (1-6 settings) allows for precise control over the oscillation rate. Lower speeds (1-3) are suitable for delicate tasks, sanding, and working with softer materials, while higher speeds (4-6) are ideal for aggressive cutting and material removal in harder materials.
LED Work Light: An integrated LED light illuminates the work surface, providing better visibility and accuracy, especially in poorly lit environments or when working inside cabinets or tight spaces.
Tool-Free Blade Clamp: The quick-release blade clamp mechanism allows for rapid and secure attachment and removal of accessories. To attach an accessory, the locking clamp is lifted, the accessory is inserted, and the clamp is lowered to secure it. To remove, the process is reversed.
Adjustable Accessory Positioning: Accessories can be mounted in various positions (e.g., 0°, 90°, 180°, 270°) to optimize the cutting or sanding angle for different applications and access tight spaces.
Dust Extraction Compatibility: While not explicitly detailed as an accessory in the provided manual, many oscillating tools offer dust extraction attachments to keep the work area clean and reduce airborne dust, improving safety and visibility.
Battery Indicator: The 18V battery packs typically include a fuel gauge or indicator to show the remaining charge, helping users manage their power and avoid unexpected interruptions.
Ergonomic Design: The tool features an overmold grip and balanced design to enhance user comfort, reduce vibration, and provide better control during operation, minimizing fatigue during prolonged use.

Maintenance Features

General Maintenance:
- Cleaning: Regularly clean the tool's vents and housing to prevent dust and debris buildup, which can hinder performance and lead to overheating. Use a soft brush or compressed air to clear the vents. Avoid using solvents or harsh chemicals that could damage plastic parts.
- Accessory Inspection: Before each use, inspect accessories for damage, wear, or dullness. Replace worn or damaged accessories to ensure optimal performance and safety.
- Battery Care: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. Follow the manufacturer's instructions for charging and discharging to prolong battery life. Do not store batteries in a completely discharged state.
- Lubrication: The tool is designed with sealed bearings and internal components that typically do not require user lubrication. Any internal maintenance should be performed by qualified service personnel.
Storage: Store the multi-tool and its accessories in a clean, dry, and secure location, out of reach of children and unauthorized users.
Service: For any repairs or issues beyond routine cleaning and accessory replacement, contact RIDGID customer service or an authorized service center. Do not attempt to modify or repair the tool yourself, as this could void the warranty and pose safety risks.
Battery Pack Removal/Installation: To remove the battery, depress the latches on the sides of the battery pack and pull it out. To install, slide the battery pack into the tool until it clicks securely into place. Ensure the battery is fully seated before operation.
Accessory Installation/Removal: The tool-free accessory change system simplifies this process. Lift the locking clamp, insert the accessory onto the spindle, and then push the locking clamp down to secure it. To remove, reverse the process.
Sanding Pad Replacement: When the sanding pad wears out or becomes damaged, it can be replaced. The manual provides instructions for removing the old pad and attaching a new one, ensuring proper fit and function.
Warranty: The tool is backed by a 90-day satisfaction guarantee and a three-year limited warranty, covering defects in materials and workmanship. Registration of the product is recommended to facilitate warranty claims.