To Next PageTo Next Page
Need help?Do you have a question about the RIDGID R8711 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque | 750 in-lbs |
| Speed Settings | 2 |
| Chuck Type | Keyless |
| Battery Included | No |
| Number of Speed Settings | 2 |
| Type | Drill |
| Chuck Size | 1/2 inch |
| Power Source | Battery |
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Proper plug use, avoid ground contact, protect against rain/wet conditions.
Stay alert, use PPE, prevent unintentional starting, proper dress.
Do not force tool, ensure switch works, proper use.
Have tool serviced by qualified personnel, never service damaged battery packs.
Wear ear protection, hold by insulated surfaces, protect lungs/hearing.
Operate at correct speed, start slow, apply pressure in line with bit.
Know your tool, wear eye protection, save instructions.
Explains DANGER, WARNING, CAUTION, NOTICE levels of risk.
Explains symbols like Safety Alert, Eye Protection, Recycle Symbol.
Details on speed, torque, clutch, chuck size, and blows per minute.
Use only properly assembled parts, do not modify, call for assistance.
Avoid carelessness, remove battery pack when not in use, wear PPE.
Lists uses like hammer drilling and driving screws.
Instructions for attaching/detaching belt hook or bit holder.
Steps to insert and remove the battery pack.
How the trigger controls speed and power.
How to select forward, reverse, or center lock.
Location and function of the LED work light.
Operating the two-speed settings for different applications.
How to insert and remove drill bits.
Switching between drill, drive, and hammer modes.
Setting torque for different screw sizes and materials.
Steps for drilling holes and driving screws.
Techniques for drilling wood and metal.
Techniques for drilling brick, tile, and concrete.
Use only identical replacement parts for safety and product integrity.
How to clean plastic parts without damage.
Contact info for parts, service, and authorized centers.
