Need help?Do you have a question about the RIEJU Marathon 125 and is the answer not in the manual?
General| Cooling System | Liquid cooled |
|---|---|
| Fuel System | Carburetor |
| Rear Suspension | Mono-shock |
| Front Brake | Disc |
| Rear Brake | 200 mm disc |
| Power | 11 kW |
| Transmission | 6-speed |
Details the set of keys provided for ignition and steering lock, emphasizing safekeeping of the key number.
Details the instrument panel's components, including the ignition switch, speedometer, and neutral indicator.
Details the speedometer, odometer, trip meters, indicator lights, and volt meter functions.
Explains the operation of the 'Select' and 'Adjust' buttons for navigating the instrument display and its functions.
Details the operation of the 'Adjust' button for switching functions, changing units, and resetting trip meters.
Guides users on entering setting mode to configure tire circumference and sensor points using 'Adjust' and 'Select' buttons.
Describes the 3-position indicator switch for controlling turn signals and hazard lights.
Details the horn button and the main/dip beam light switch located on the left handlebar.
Explains the use of the choke lever for starting a cold engine and the caution for returning it to its original position.
Describes the location and operation of the clutch lever, front brake lever, rear brake pedal, and gear box pedal.
Details the operation of the front brake, including bleeding the system and topping up fluid.
Guides on starting the engine, opening the petrol tap, using the choke, and riding away smoothly.
Details specifications for the Marathon 125/200 PRO (Ø 40mm forks) and Marathon 125/200 (Ø 37mm forks), including oil type and capacity.
Describes the rear suspension systems for Marathon 125/200 PRO (gas-assisted mono-shock) and Marathon 125/200 (hydraulic monoshock).
Guides on adjusting chain tension using rear axle plates and specifies chain tolerance (35-45 mm movement).
Details the procedure for changing gearbox oil, including locating drain/fill plugs and recommended oil type/capacity.
Provides steps for cleaning the vehicle, including using degreasing agents and avoiding pressure washers.
Lists the technical dimensions (length, width, height, etc.) and basic weight of the motorcycle.
Details engine type, gears, make, capacity, piston size, starter system, and lubrication oil type.
Specifies transmission oil type/quantity and air filter type.
Provides information on petrol type, tank capacity, and carburettor model.
Details the spark plug type, electrode separation, and clutch type.
Details front fork (Ø 40mm) and rear gas shock absorber specifications for the PRO model.
Details front fork (Ø 37mm) and rear hydraulic monoshock specifications for the standard model.
Lists the specifications for the front (300 mm disc) and rear (200 mm disc) brakes on the PRO model.
Lists the specifications for the front (260 mm disc) and rear (200 mm disc) brakes on the standard model.
Provides tyre sizes and recommended pressures for the Enduro version (front and rear).
Provides tyre sizes and recommended pressures for the Super Motard version (front and rear).
To Next Page
