Need help?Do you have a question about the RIEJU Marathon 125 PRO and is the answer not in the manual?
General| Fuel Capacity | 7.5 liters |
|---|---|
| Bore x Stroke | 58.0 mm x 47.2 mm |
| Engine Type | Single-cylinder, 4-stroke |
| Rear Suspension | Monoshock |
| Front Brake | Disc |
| Rear Brake | Disc |
Overview of the motorbike's engine, cooling, ignition, and chassis.
Details on front and rear disc brake sizes and materials.
Location and purpose of the chassis or VIN number for registration and service.
Explanation of key types and ignition switch positions.
Description of speedometer, lights, and warning indicators on the dashboard.
How to use the speedometer, odometer, and trip functions.
Operation of instrument panel buttons and the volt meter display.
Guide to switching between odometer, trip, and hour meter displays using the Adjust button.
Guide to switching between clock, stopwatch, and speed record using the Select button.
Procedure to enter setting mode for tire circumference and sensor point.
Instructions for setting the clock and stopwatch distance.
Description of indicator, horn, and light switches on the left handlebar.
How to use the choke lever for starting a cold engine.
Operation of clutch lever, front brake lever, and rear brake pedal.
Instructions for using the gear shift pedal for different gears.
Details on accessing and capacity of the petrol tank.
Explanation of the OFF, ON, and RESERVE positions of the fuel tap.
Comprehensive list of checks for lights, brakes, tires, and chain before riding.
Procedure for checking and bleeding the front brake system.
How to check rear brake fluid level and brake pad wear.
Verifying the operation of the throttle, lights, indicators, and start switch.
Importance of tyre pressure and wear for road holding and safety.
Recommended tyre pressures for Enduro and Supermotard models.
Step-by-step guide for starting the engine and riding the motorbike.
Guidelines for the initial break-in period and proper braking techniques.
Procedures for safely stopping the motorbike and changing gears.
Details on the 40mm upside down forks for the PRO model.
Details on the 37mm upside down forks for the standard model.
Description of the rear shock absorbers for PRO and standard models.
How the radiator maintains engine temperature and how to check coolant.
Correct spark plug type, gap setting, and installation process.
Steps for accessing and cleaning the air filter element.
How to adjust the drive chain tension and check for proper movement.
Guidelines for cleaning and lubricating the transmission chain.
Steps for draining and refilling the gearbox oil.
Recommended methods for washing the motorbike and avoiding damage.
Steps for preparing the motorbike for long-term storage.
Specifications for overall dimensions, weight, engine type, and capacity.
Details on transmission oil, air filter, fuel, spark plug, clutch, and chain.
Technical details for front/rear suspension and brake systems.
Tyre sizes and pressures, ignition system, and bulb outputs.
To Next Page