What causes RIEJU Motorcycle brakes to not work properly?
If the brakes on your RIEJU Motorcycle aren't working properly, it could be due to worn brake discs, which need to be changed. Another cause may be worn brake pads, so check and change the pads if necessary. For issues like loss of brake fluid, impaired brake fluid, or a broken piston pump, it is best to contact the official RIEJU official service.
What causes RIEJU MR 300 Motorcycle gears to jump?
If the gears on your RIEJU Motorcycle are jumping, it could be due to a worn shift fork, worn gear grooves, a broken gear, a damaged shift drum groove, a worn shift fork axle, or a broken selector position spring. In all these cases, it is best to contact the official RIEJU official service.
Why RIEJU MR 300 gears are not engaged?
If the gears on your RIEJU Motorcycle aren't engaging, it could be due to the clutch not disengaging, a bent or blocked shift fork, a gear locked in the transmission, a damaged gear shift lever, a loose or broken spring selector position, a broken shift drum, or a broken gear ratchet spring. In all these cases, it is best to contact the official RIEJU official service.
Why does RIEJU MR 300 Motorcycle clutch slips?
If the clutch on your RIEJU Motorcycle is slipping, it could be due to an excessive clutch fluid level. Check the level and adjust if necessary. Other potential causes include worn clutch discs or a broken or weak clutch spring. In these cases, it is best to contact the official RIEJU official service.
What causes RIEJU MR 300 to lean to one side?
If your RIEJU Motorcycle tends to lean to one side, it could be due to a bent chassis, in which case you should contact the official RIEJU official service. Other potential causes include poorly adjusted steering, requiring you to check the steering play adjustment; a bent steering axle or front fork, in which case you should contact the official RIEJU official service; or wheels out of alignment, requiring you to check the tension of the spokes of the rims.
Why does RIEJU Motorcycle engine does not crank?
If your RIEJU Motorcycle engine does not crank, it could be due to a seized crankshaft, seized cylinder/piston/connecting rod, or a seized transmission assembly. In all these cases, it is best to contact the official RIEJU official service.
General| Cooling System | Liquid cooled |
|---|---|
| Transmission | 6-speed |
| Fuel System | Carburetor |
| Starting | Kick start |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Wheelbase | 1, 480 mm |
| Engine Type | Single cylinder, 2-stroke |
| Front Brake | 260 mm disc |
| Rear Brake | 220 mm disc |
| Fuel Capacity | 9.8 L |
| Frame | Steel |
| Weight | 105 kg |
Guides on using kick-starter, electric starter, and the engine break-in process.
Details essential daily checks for fuel, oil, coolant, brakes, and tires.
Outlines periodic maintenance tasks, intervals, and general lubrication points.
Covers maintenance for clutch, spark plug, air filter, carburetor, transmission oil, chain.
Addresses issues like engine not cranking, not starting, or stopping unexpectedly.
Solves problems with overheating, uneven running, lack of power, strange noises, and handling.
To Next Page
