The radio controls of the FM400, NOIRE, EDGE and TANGOSW series are of the
self-learning type; they are so-called universal because the output contacts are
potential free, and therefore can be used on all type of control units.
These 3 series (no TANGOSW) feature a digital coding system with over a million
different combinations. The transmitters do not require any programming since the
code, different for each transmitter, is set at the factory during the testing operations.
The FM400 / NOIRE series is an advanced version of traditional remote controls; its
“Rolling-Code” variable code system provides enhanced security and inviolability.
Moreover, the FM400 series operates with frequency modulation (FSK).
MODELS
SPECIFICATIONS
FM400 RB2 Compact receiver with 2 relay outputs and screw terminal connections;
compatible with FM400 series transmitters. 12/24 V ac/dc power
supply.
NOIRE RB2 Compact receiver with 2 relay outputs and screw terminal connections;
compatible with NOIRE series transmitters. 12/24 V ac/dc power
supply.
EDGE RB2 Compact receiver with 2 relay outputs and screw terminal connections;
compatible with EDGE series transmitters. 12/24 V ac/dc power supply.
TANGO RB2 SW Compact receiver with 2 relay outputs and screw terminal connections;
compatible with TANGO SW series transmitters. 12/24 V ac/dc power
supply.
FM400 R4P Receiver with 4 relay outputs and screw terminal connections;
compatible with FM400 series transmitters. 12/24 V ac/dc power
supply.
NOIRE R4P Receiver with 4 relay outputs and screw terminal connections;
compatible with NOIRE series transmitters. 12/24 V ac/dc power
supply.
EDGE R4P Receiver with 4 relay outputs and screw terminal connections;
compatible with EDGE series transmitters. 12/24 V ac/dc power supply.
Fm400 230R4 Receiver with 4 relay outputs and screw terminal connections;
compatible with FM400 series transmitters. 230V/24 V ac power supply.
NOIRE 230R4 Receiver with 4 relay outputs and screw terminal connections;
compatible with NOIRE series transmitters. 230V/24 V ac power supply.
EDGE 230R4 Receiver with 4 relay outputs and screw terminal connections;
compatible with EDGE series transmitters. 230V/24 V ac power supply.
All EDGE receivers are also compatible with the transmitters of the previous TANGO
series (NORolling-Code, NO TangoSW).
24
25
GB
RB2
u.m.
FM400 RB2 NOIRE RB2 EDGE RB2
TANGORB2SW
Power supply
Consumption when idle
Operating temperature
V
mA
°C
12/24 dc/ac
40
-20 +55
Memorizable codes 24LC04 -
163 / 70 (R.C.)
163 244
Memorizable codes 24LC16 -
675 / 289 (R.C.)
675 1012
Memorizable codes 24LC32 500 - - -
Memorizable codes 24LC64 1012 ---
Relay contact max capacity A 0,5 (30 V max.)
R4P
u.m.
FM400 R4P NOIRE R4P EDGE R4P
Power supply
Consumption when idle
Operating temperature
V
mA
°C
12/24 dc/ac
40
-20 +55
Memorizable codes 24LC04 -
163 / 70 (R.C.)
163
Memorizable codes 24LC16 -
675 / 289 (R.C.)
675
Memorizable codes 24LC32 500 - -
Memorizable codes 24LC64 1012 --
Relay contact max capacity A 4 (30 V max.)
230R4
u.m.
FM400 230R4 NOIRE 230R4 EDGE 230R4
Power supply
Consumption when idle
Operating temperature
V
mA
°C
230 (50/60Hz)
12
-20 +55
Memorizable codes 24LC04 -
163 / 70 (R.C.)
163
Memorizable codes 24LC16 -
675 / 289 (R.C.)
675
Memorizable codes 24LC32 500 - -
Memorizable codes 24LC64 1012 --
Relay contact max capacity A 5 (230 V max.)
RECEIVER TECHNICAL SPECIFICATIONS
GB
To Next Page
Loading...
Need help?
General