Riello Cardin T624 User Manual

V. 10.2017
ZVL609.00
mod. T624
CENTRALE COMANDO PER 1-2 MOTORI 24V
Istruzioni d’uso e di programmazione
CENTRALE DE COMMANDE POUR 1-2 MOTEURS 24V
Notice d'emploi et de programmation
CENTRAL DE MANDO PARA 1 O 2 MOTORES DE 24 V
Instrucciones de uso y programación
ELECTRONIC CONTROL UNIT FOR 1 or 2 24V-MOTORS
Programming and user instructions
STEUERZENTRALE FÜR 1-2 MOTOREN MIT 24V
Gebrauchs- und Programmierungsanweisungen
BESTURINGSKAST VOOR 1-2 24V MOTOREN
Gebruiksaanwijzing en programmeerinstructies
I
F
E
GB
D
NL

Riello Cardin T624 Specifications

General

Brand	Riello
Model	Cardin T624
Category	Control Unit
Language	English

Summary

CHARACTERISTICS AND COMPONENT DESCRIPTIONS

Main Characteristics of the ECU

Details key features like torque, deceleration, soft-start, and sensor inputs.

Component Descriptions (Fig. A)

PRELIMINARY CHECKS AND IMPORTANT INSTALLATION INFORMATION

Pre-Installation Checks

Essential checks for structure, limits, friction, and wiring before installation.

Important Installation Warnings

Critical safety and compliance warnings for qualified installers.

ELECTRIC CONNECTIONS

Safety Edge and Photoelectric Cell Connections

Input and Command Connections

MOTOR AND OUTPUT TERMINAL FUNCTIONS

Motor Outputs (M1, M2) and Encoder Inputs

Details terminal functions for motor outputs and encoder sensor inputs.

SAFETY DEVICE EXCLUSION DIP-SWITCHES

Excluding Safety Devices

Explains how to use dip-switches to exclude safety inputs like BSC, BSA, FT1, FT2, J1, J2, STP.

SETTING THE MOTOR TYPE

Motor Type Selection Procedure

Step-by-step guide to setting the motor type for optimal performance.

Motor Positioning Manoeuvre

Procedure to set motor positions and verify installation in manual mode.

PROGRAMMING THE TRAVEL DISTANCE AND PAUSE TIMES

Programming Methods Overview

Explains automatic and advanced manual methods for programming travel times.

Important Notes Before Programming

AUTOMATIC PROGRAMMING (simplified)

Guides through simplified self-learning programming for travel limits and deceleration.

AUTOMATIC PROGRAMMING (simplified) - Continued

Motor M2 Closing and M1 Closing Sequence

M1 Opening and M2 Movement

ADVANCED PROGRAMMING (manual)

Manual Programming Introduction

ADVANCED PROGRAMMING (manual) - Continued

M2 Closing and M1 Closing Sequence

M1 Opening and M2 Movement Sequence

ADVANCED PROGRAMMING (manual) WITH SINGLE GATE LEAF AUTOMATION

Single Gate Leaf Automation Procedure

Guides through manual programming for single gate leaf automation.

M1 Closing and Opening Sequence

PROGRAMMING OF PEDESTRIAN OPENING

Pedestrian Opening Configuration

Pedestrian Opening Procedure

Step-by-step guide for programming pedestrian opening time for single motor.