Need help?Do you have a question about the Riello RDB 3.2 BT 50/70 and is the answer not in the manual?
General| Fuel | Light oil |
|---|---|
| Nozzle Angle | 60° |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Protection degree | IP40 |
| Air Pressure Switch | Yes |
| Nozzle Pressure | 10 - 12 bar |
| Type | RDB 3.2 BT 50/70 |
Lists fundamental safety rules for operating the burner, including user restrictions and precautions.
Provides detailed technical data including output, fuel, electrical supply, and components.
Emphasizes safety precautions and requirements for burner installation.
Details the steps and safety precautions for fixing the burner to the boiler.
Instructions for assembling the burner, focusing on CF and BF applications and air intake requirements.
Highlights crucial safety measures for electrical wiring installation and maintenance.
Stresses the importance of qualified personnel for the initial burner start-up and safety checks.
Details how to adjust combustion parameters like CO2 based on ambient conditions.
Provides instructions for adjusting the combustion head for optimal air-fuel mixture.
Lists various lockout types, their causes, and corresponding LED indications.
Emphasizes safety procedures and requirements for performing maintenance.
Identifies common faults, their possible causes, diagnostics, and solutions.
To Next Page