Need help?Do you have a question about the Riello RLS 1000/M MX and is the answer not in the manual?
General| Control System | Electronic |
|---|---|
| Voltage | 400V |
| Fuel Type | Natural Gas |
| Firing Rate (max) | 11600 kW |
| Power Supply | 400V, 3 phase, 50Hz |
| Burner Output | 100-1000 kW |
| Efficiency | High |
Requirements for qualified personnel and user responsibilities.
Comprehensive technical data including output, pressure, and temperature.
Information on burner firing rates and test boiler requirements.
Technical data, use, and installation notes for the RFGO-A22 control box.
Safety guidelines for installation, handling, and preliminary checks.
Guidance on nozzle installation, types, and calibration.
Details on double-pipe and loop circuits for light oil supply.
Specifications for the pump and procedures for priming.
Information on gas supply, feeding lines, and safety precautions.
Guidelines for electrical wiring, safety, and cable routing.
Safety notes for the initial start-up and preparation.
Steps for adjusting nozzle, combustion head, pump, and fan damper.
Adjustments prior to gas ignition, start-up, and ignition process.
Adjusting burner output, modulation, and air/fuel ratio.
Step-by-step guide for calibrating the burner's output and parameters.
Instructions for adjusting air, maximum gas, and minimum gas pressure switches.
Detailed sequence of burner start-up, steady state, and flame loss events.
Performing final checks to ensure correct burner operation and safety.
Essential safety measures to be taken before performing maintenance.
To Next Page
