Need help?Do you have a question about the Riello RLS 130 and is the answer not in the manual?
General| Fuel Type | Light Oil |
|---|---|
| Air Pressure Switch | Yes |
| Control Box | Integrated |
| Frequency | 50/60 Hz |
| Protection Rating | IP40 |
| Operation | Two Stage |
Describes danger levels (maximum, serious injury, damage) with corresponding symbols.
Emphasizes the need for qualified personnel and user responsibilities for training and safety.
Provides key technical specifications such as power, fuels, operation modes, and noise levels.
Illustrates burner output curves for one-stage and two-stage operation.
Details the function, important notes, use, and electrical wiring of the control box.
Essential safety precautions for performing installation operations.
Instructions for boring the boiler plate, blast tube length, and securing the burner.
Guidance on installing nozzles, including advice on replacement and sealing.
Details on adjusting the combustion head based on maximum output and fan damper settings.
Safety precautions and guidelines for connecting the light oil supply system.
Provides technical data for the pump, including delivery rate, pressure, and depression.
Safety precautions and components for the gas supply line.
Table showing gas pressure drops for different outputs and gas types.
Safety notes and procedures for electrical wiring of the burner.
Critical safety guidelines for initial burner start-up by qualified personnel.
Steps for adjusting burner components before initial light oil ignition.
Procedure for starting the burner with light oil, including priming and potential issues.
To Next Page
