Need help?Do you have a question about the Riester metpak Series and is the answer not in the manual?
Provides essential information and warnings before using the RIESTER product.
States the intended use of the RIESTER Metpak for pressurised infusion.
Details the available RIESTER Metpak models by item number and capacity.
Lists and identifies the various parts of the Metpak instrument.
Describes the cuff sleeve and net insert component of the instrument.
Details the rear suspension loop component.
Details the front suspension loop component.
Identifies the manometer component.
Identifies the air release valve component.
Identifies the bulb component.
Provides step-by-step instructions for setting up and using the Metpak.
Verify the correct Metpak model for the intended use.
Inspect the connection of the bulb, air release valve, and tube.
Instructions to close the air release valve.
Steps for inserting the infusion bag into the cuff sleeve.
Procedure for threading suspension loops.
How to generate pressure and read the manometer.
Detailed steps for replacing the bladder component of the Metpak.
Remove the bulb and air release valve from the tube.
Remove the manometer from the tube.
Release the velcro strip on the cuff sleeve.
Remove the bladder from the cuff sleeve.
Insert new bladder and reconnect components.
Instructions for cleaning and maintaining the instrument.
Lists part numbers for available replacement components.
Details operating conditions, storage conditions, and manometer specifications.
Information on the minimal maintenance required and how to calibrate the unit.
General| Brand | Riester |
|---|---|
| Model | metpak Series |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page
