TCP Client 2 - Communication with EasyScada (PC is
Client)
You need set the correct IP address and com port in the
Device Define window of the EasySCADA.
TCP Client 3 - Our xLogicApp (Smartphone is TCP
Client)
Interface configuration
TCP Client 4 - Modbus Poll as TCP Client
CPU Working as a TCP Client (Master)
The maximum number of TCP connections is 8, so one
CPU can allow a maximum of 8 TCP Servers (Slaves) to
connect with the CPU at the same time. And each TCP
connection is totally separately.
For example:
To Next Page
Loading...
