Variable AM:
You can’t change the value of a variable AM; it can only
be read.
Cursor key:
You can’t change the status of a cursor key; it can only be
read.
Panel key:
You can’t change the status of a panel key; it can only
be read.
Shift register bit:
You can’t change the status of a shift register bit; it can
only be read.
User Management
User management interface
You can set a new username and password on this page.
If you have set a new username and password, the old
username and password can’t be used. The web server just
has a username and a password.
If you forget the username or password, you can reset it
by using the LCD menu.
You can reset to factory settings by using the menu option:
Network-> IP Config. -> Factory-> RST Log on
After you reset the logon, the username and password will
be set back to the default “admin”.
RIEVTECH On-line
RIEVTECH On-line Interface
You can monitor and operate the LCD panel remotely.
To Next Page
Loading...
