Rievtech ELC Series - Page 42

EN
Programmable Relay ● User Manual for ELC, EXM and PR Series 42 2020 v6.0 ● © Rievtech Co.,
Ltd. ● www.rievtech.com
How to Change GPRS Parameters and Setting by SMS
FORMAT: ##**PGPRS:<parameter>”<value>”,<parameter>”<value>”,…,<parameter>”<value>”;
The following parameters may be changed by SMS, which can be done with one SMS by separating parameters with a
comma (,).
NOTICE:
The PGRPS command can have a maximum of 100 characters.
##** (Start of Message Characters)
PGPRS: (Command)
TIMEOUT”60”, (Unit: secs – Minimum 30)
IPORDOMAIN”0”, (Network Mode Change – 0 = Use IP Address, 1 = Use Domain Name)
POWCONNECT”0”, (Connect to Ethernet on Power On – 0 = No, 1 = Yes)
APN”CMNET”, (Change APN)
TADR”221.226.189.74”; (Change Target IP Address)
TPORT”5005”, (Change Target Port Number)
SNUMB”12345678”, (Change Device Name – Max. 8-characters)
DOMAIN”www.rievtech.co.uk”, (Change Domain Name)
; (End of Message Character)
Example
Change Timeout to 35 secs, APN to RIEVTECH, Port number to 8008
##**PGPRS:TIMEOUT”35”,APN”RIEVTECH”,TPORT”800”;