Rievtech ELC Series - Page 43

EN
Programmable Relay ● User Manual for ELC, EXM and PR Series 43 2020 v6.0 ● © Rievtech Co.,
Ltd. ● www.rievtech.com
How to Modify Email Parameters and Settings by SMS
FORMAT: ##**PEMAIL:<parameter>”<value>”,<parameter>”<value>”,…,<parameter>”<value>”;
The following parameters may be changed by SMS, which can be done with one SMS by separating parameters with a
comma (,).
##** (Start of Message Characters)
PEMAIL: (Command)
SMTPADR”smtp.163.com”, (SMTP Server Address)
SMTPPORT”25”, (SMTP Server Port Number)
SMTPUSER”xLogic@rievtech.co.uk”, (SMTP Server Username)
SMTPPWD”123456”, (SMTP Server Password)
SENDNAME”Pump Monitor 2”; (Name of Sender)
SENDEMAIL”Pump4@rievtech.co.uk”, (Email Address of Sender)
Example
To change SMTP server address (smtp.rievtech.com) and SMTP port number (88):
##**PEMAIL:SMTPADR”smtp.rievtech.com”,SMTPPORT”88”;
How to Check GSM Parameters by SMS
Retrieve GPRS settings by sending the following SMS to the GSM PLC:
##**RPGRPS;
Retrieve Email settings by sending the following SMS to the GSM PLC:
##**RPEMAIL;