Rievtech ELC Series - Page 44

EN
Programmable Relay ● User Manual for ELC, EXM and PR Series 44 2020 v6.0 ● © Rievtech Co.,
Ltd. ● www.rievtech.com
List of SMS Error Codes
The following table lists the SMS error codes that can be received from the GSM PLC.
Table 11 - GSM SMS Error Codes
Code
Description of Error
Possible Cause
6
Undefined/Cannot/Failed to modify parameters
Check SMS parameter spelling is correct and valid
30
The phone number/email address field sent does not
meet requirements
Check the format of the phone number/email address
sent
31
Data length out of range
Too many characters in SMS message
32
No end of message character
Check SMS ends with ; character
34
Parameter modification not supported
Check the parameter to be changed is valid
35
No record found
The phone book entry sent via SMS cannot be found
36
Password field error
The password change contains unsupported
characters
37
Wrong password
The password sent for userx is not correct
38
Empty or uninitialized phone book
The phone book in the GSM PLC has no entries or
needs to be reloaded to be initialised
39
Abnormal data record
The current record field cannot be changed or is
corrupt
40
No record segment
The parameter for the record cannot be found
41
Phone book failed to save
Download phone book using xLogicsoft again
43
PLC parameter change via LCD
Parameter modified using PLC LCD screen
44
Software function not supported
Check instruction being sent to PLC is correct