xLogicsoft Functions
The ELC and PR-Series of Rievtech CPUs can be
programmed using FBD, which includes a variety of pre-
configured function blocks:
16 Co - Constant Blocks
9 GF - Basic Function Blocks
49 SF - Special Function Blocks
15 AP – App Function Blocks
MQ – MQTT Function Blocks
Add Your Own Library Blocks
By adding these blocks to your program and linking them
together, you can create relatively complex control
programs. This manual will describe each available block
in detail in the following sections.
Blocks are placed into your work area by selecting them
from the left-hand block list in xLogicsoft and clicking
anywhere in your workspace to the right of the block list.
Blocks are connected to each other by clicking on either
the input or output pin of the block (a chain icon will
appear) and without releasing the mouse button, drag the
connector to the block-pin you wish to link to (a chain
icon will appear), then let go of the mouse button. We are
continuingly adding features to our software and should
you need a new special function block which currently
does not exist in xLogicsoft, then let us know and we will
look at adding it. Contact: technical@rievtech.com.
To Next Page
Loading...
