RIF6 V4 - Technical Specifications

9
V4 Headphones
DISTORTION
TECHNICAL SPECIFICATIONS
• Ensure the volume level of headphone is set to an approximate level.
• The headphone is too far from the transmitter, move it closer.
• The audio signal input level is too low. Increase the volume of the audio source.
Transmission Mode:
Carrier Frequency:
Operation Voltage:
Frequency Response:
Distortion:
S/N Ratio:
Operation Distance:
UHF Stereo
2.4GHz Digital
Transmitter, DC 5V 550mA
Headphone, 2 x AAA size Rechargeable NiMH
batteries (included)
30Hz - 20KHz
0.5%
70 dB
Up to 30 meters